emonPi User Guide

• Install Guide
  • 1. CT sensor
  • 2. AC-AC Adapter
  • 3. DC 5V USB Adapter
  • 4. Optical Utility Meter LED Pulse Sensor (optional)
  • 5. Temperature Sensors (optional)
  • 6. Installation Examples
  • 7. Power Up
  • 8. Shutdown
  • 9. Video Guide
• Connect
  • Option 1: Connecting via Ethernet
  • Option 2: Connecting via WiFi
  • Option 3: Connect to Ethernet and then configure Wifi
  • Advanced: Assign static
• Pulse counting
  • Option 1: Using an Optical pulse sensor
  • Option 2: Wired pulse counting
• Temperature sensing
  • Example: 4x temperature sensors and a RJ45 breakout
  • RJ45 Pinout
  • Further reading
• Firmware
  • Available Firmware
  • Updating firmware directly from the emonPi user interface
  • How to compile and upload firmware
• Configuration
  • The emonPi_CM front-end firmware - description
  • Configuration & on-line calibration
  • Adding or moving Temperature Sensors
• Modifications
  • Adding a Real Time Clock (RTC)
  • LightWaveRF OOK
• Use in North America
  • 1. Ensure clip-on CT sensor will fit your conductors
  • 2. Use USA AC-AC Adapter
  • 3. Software Calibration
  • 4. Sum power values
• Technical
  • emonPi Internals
  • System Overview
  • RaspberryPi and emonSD
  • Open Source
  • emonPi Specification